NEC WT600 User Manual
Page 7
iii
What's in the Box?
Make sure your box contains everything listed. If any pieces are
missing, contact your dealer.
Please save the original box and packing materials if you ever
need to ship your WT600 Projector.
Remote control
(7N900362)
Power cable
(North America: 7N080204)
(Europe: 7N080003)
Projector
Remote Control Cable
(07N520019)
CD-ROM (7N950108)
Projector User Supportware
USB cable
(7N520013)
Setup
Guide
NEC
Software Utility
Installation Guide
User's
Manual
Batteries
For North America only
Registration card
Limited warranty
For Europe only
Guarantee policy
RGB signal cable
(7N520012
OF
F
VID
EO
AUT
O AD
J.
RG
B
VIE
WE
R
LAS
ER
PO
WE
R
ON
PJ
ASPECT
3D
REFORM
HELP
POIN
TER
VOLUME
MAG
NIF
Y
ZOOM
PIC
-MU
TE
SLIDE
FOLD
ER
SL
IDE
LIST
SELE
CT
FREE
ZE
FO
CUS
DVI-D signal cable
(7N520007)
Fire and Shock Precautions
1. Ensure that there is sufficient ventilation and that vents are
unobstructed to prevent the build-up of heat inside your pro-
jector. Allow at least 4 inches (10 cm) of space between your
projector side and a wall.
2. Prevent foreign objects such as paper clips and bits of paper
from falling into your projector.
Do not attempt to retrieve any objects that might fall into your
projector. Do not insert any metal objects such as a wire or
screwdriver into your projector. If something should fall into
your projector, disconnect it immediately and have the object
removed by a qualified NEC service personnel.
3. Do not place any liquids on top of your projector.
4. Do not look into the mirror or the light source while the pro-
jector is on. Serious damage to your eyes could result.
5. Do not block the light path between the light source and the
final mirror with any objects. Doing so could cause the object
to catch on fire.
6. The projector is designed to operate on a power supply of
100-120 or 200-240 V 50/60 Hz AC. Ensure that your power
supply fits this requirement before attempting to use your
projector.
7. Handle the power cable carefully and avoid excessive bend-
ing.
A damaged cord can cause electric shock or fire.
8. If the projector is not to be used for an extended period of
time, disconnect the plug from the power outlet.
CAUTION
1. Do not try to touch the ventilation outlet on the both sides as
it can become heated while the projector is turned on.
2. Do not attempt to move or carry the projector using the mir-
ror cover.
Doing so can result in the projector overturning and causing
injury. Using the two side handles is the proper way to move
the projector.
When carrying or transporting the projector, close and lock
the mirror cover with the mirror cover lock switch.
3. The carrying handles are designed for the purpose of carry-
ing the projector.
Do not hang from the projector by the carrying handles in a
ceiling mounted installation. Doing so may result in the car-
rying handles separating from the unit or the projector may
separate from the mount resulting in personal injury.
4. Enable High-Speed Fan mode if you continue to use the pro-
jector for consecutive days. (From the Advanced menu, se-
lect [Projector Options]
→ [Setup] → [Page 4] → [High Speed
Fan Mode].)
5. Do not unplug the power cable from the wall outlet under any
one of the following circumstances.
Doing so can cause damage to the projector:
*
While the Hour Glass icon appears.
*
While the message "Please wait a moment." appears. This
message will be displayed after the projector is turned
off.
*
While the cooling fans are running. (The cooling fans con-
tinue to work for 90 seconds after the projector is turned
off).
6. Do not eject the PC card or LAN card while its data is be-
ing accessed. Doing so can damage your PC card or LAN
card.
Lamp Replacement
•
To replace the lamp, follow all instructions provided on page
7-1.
•
Be sure to replace the lamp when the message "The lamp
has reached the end of its usable life. Please replace the
lamp." appears. If you continue to use the lamp after the
lamp has reached the end of its usable life, the lamp bulb
may shatter, and pieces of glass may be scattered in the
lamp case. Do not touch them as the pieces of glass may
cause injury.
If this happens, contact your NEC dealer for lamp replace-
ment.
•
Allow a minimum of 90 seconds to elapse after turning off
the projector. Then turn off the main power switch, discon-
nect the power cable and allow 60 minutes to cool the pro-
jector before replacing the lamp.
Important Information
Stickers (Use as appropriate)
Mirror cleaning cloth (24BS7251)
Dust-proof cover (24BS7271)
DVI-A to VGA signal
cable
(7N520011)