Nortel Networks P0857846 - Manual (Page 138)

Using System features / 125
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
If you forget the administration or basic passwords, you cannot do
any programming. Call your customer service representative to
assign a new password.
The password is a one to six-digit number. It is advised to make your
password at least six digits long for security reasons. If you press
CHANGE but do not enter a new password, the existing password is
erased. Anyone can then access programming without a password.
The default System Coordinator password is ÅΘȈ , which
is the same as ¤‹fl›fl .
One password cannot be a subset of another one. For example, you
cannot have 123 and 12345.
Using a Basic password
In addition to a System Coordinator password, there is a Basic
password. This lets you delegate some of the duties of being a
system coordinator to someone else without allowing access to
sensitive programming.
The default Basic password is ıÅÍÈÇ or ¤¤‡›¤ .
You can enter the Basic password after the following feature codes:
• ƒ•• ЛН‰В (User Preferences)
• ƒ ••ÊȘ‰ (to change the system time and
date)
Because the Basic password can be used to change the time, you
should give it out with care and change it when necessary (for
example, when an employee leaves the company). If restrictions,
routing or other services operate on a schedule, changing the time
can allow someone to bypass the programming.
Registration password
The Registration password is used to control the registration of
Companion portables to the Norstar system. See the
Norstar-
Companion MICS-XC 2.0 System Coordinator Guide for more
information.