Nortel Networks P0857846 - Manual (Page 43)

30 / Answering calls
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Customizing your CAP module
If your installer has programmed the CAP module to be the central
answering position for your system, you can move external lines
onto the CAP module by using
ƒ•°⁄ . See “Moving line
buttons” on page 98.
Any of the buttons on your CAP module that do not select lines can
be programmed to dial internal or external numbers automatically.
You can also program features onto CAP module buttons. See
“Time savers for making calls” on page 55 and “Customizing your
telephone” on page 95 for information on programming memory
buttons.
Buttons on a CAP module cannot be assigned as incoming line
group or answer buttons.
Monitoring telephones with the CAP module
The indicators ˆ beside internal autodial buttons on your CAP
module show the status of Norstar telephones.
The indicator is on when the telephone has:
• an active call
• Do Not Disturb turned on
The indicator is off when a telephone has:
• no active call
• a call on hold and no other active call
Release button
Pressing ® ends a call. You do not have to put the receiver down.
® also ends feature programming.
Tip - You can send up to 30 messages from a
CAP.