Nortel Networks P0857846 - Manual (Page 81)

68 / Transferring calls
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Each Norstar telephone can handle only one camped call at a time.
Displays
You tried to camp a call to a telephone that
already has a camped call. The call has
come back to you. Press the
CALLBACK
button or the line button to reconnect to the
call. On the M7100 telephone, just pick up
the receiver.
The person to whom you redirected a call
has Do Not Disturb active on the telephone.
The call has come back to you. Press the
CALLBACK button or the line button to
reconnect to the call. On the M7100
telephone, just pick up the receiver.
You have tried to camp an internal call. You
can only camp external calls.
Dial the number of the internal telephone to
which the call will be sent.
The telephone to which you camped a call
did not answer the call. The call has come
back to you. Press
CALLBACK or the line
button to reconnect to the call. On the M7100
telephone, just pick up the receiver.
A call you camped has come back to you, but
the caller hung up before you could
reconnect.
The telephone to which you have camped a
call is out of service or is being used for
programming. The call has come back to
you. Press
CALLBACK or the line button to
reconnect to the call. On the M7100
telephone, just pick up the receiver.
The line that the camped call is on is in use
or that line does not appear at your
telephone. Release the line or release an
internal line.
For other displays, see “Common feature displays” on page 149.