Nortel Networks P0857846 - Manual (Page 139)

126 / Using System features
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Changing passwords
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ‘ four times.
4. Press ≠ at Passwords .
5. Press ‘ until you see Progrming pswds ˆ .
6. Press ≠ .
7. Press ‘ until you see the name of the password you
want to change.
8. Use ≠ , CHANGE and the dial pad to enter the new
password. Press OK to accept the new password.
You cannot erase or eliminate the ability to program passwords.
Clearing a Call Log password
If an individual has forgotten their Call Log password, you can clear
it in programming. The individual can then enter a new password
from his or her telephone.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ‘ four times.
4. Press ≠ at Passwords .
5. Press ‘ until the display shows Call log pswds .
6. Press ≠ and enter the internal telephone number of the
telephone where you wish to clear the Call Log password.
7. Press ≠ , then press CLR to clear the password.