Nortel Networks P0857846 - Manual (Page 59)

P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Making calls
There are many ways to make a call. Depending on programming
and the type of call, these are the ways to make a call:
• Pick up the receiver and dial. The Norstar system supports three
methods of dialing. See “Changing how you dial your calls” on
page 49.
• Pick up the receiver, press a line button, and dial (if the call is
not on your prime line).
• Press © and dial (to talk without using the receiver).
See “Using Handsfree/Mute” on page 40.
• Press © , press a line button, and dial (to talk without the
receiver and if the call is not on your prime line).
• Press a line button and dial (to talk without the receiver and if
Automatic Handsfree is assigned to your telephone).
• Use one of the features that make dialing easier. See “Time
savers for making calls” on page 55.
Displays
The telephone you have called has no
internal lines available. Press
LATER to use
the Ring Again or Message features or press
PRIORITY to make a priority call.
You are dialing using Pre-dial. To erase an
incorrect digit, press the left end of
√
or BKSP . When the number is
complete, select a line or lift the receiver.
This prompt remains on your display as long
as you are on a call you have dialed. To
transfer the call, press
TRANSFER .
Your telephone is already connected to the
telephone you are trying to call. Check your
active line buttons, and return to that call.