Nortel Networks P0857846 - Manual (Page 46)

Answering calls / 33
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
the call. Your installer or customer service representative can
program telephones to have automatic Call Display.
Changing which information is shown first about a call
Depending on the services you subscribe to, Call Display
information may contain up to three parts: the name of the caller, the
number of the caller, and the name of the line in your Norstar system
that the call is on. For each telephone, you can determine which
information is displayed first.
You will need the programming template found at the front of this
guide. See Getting Started for more information.
1. Press ƒ••¤flfl‹›› .
2. Press ¤‹fl›fl (the default System Coordinator
password).
3. Press ≠ and enter the internal number of the telephone
you wish to program.
4. Press ≠ .
5. Press ‘ four times.
6. Press ≠ .
7. Choose a setting at 1stDisplay: using the CHANGE button. The
choices are Name , Numbr or Line .
You may see Unknown name or Unknown number on the display if the
information is not available from your telephone company. You may
see
Private name or Private number on the display if the caller
blocks that information.
Picking up a call ringing at another telephone
You can pick up a call ringing at another telephone using Directed
Pickup or Group Pickup.