Nortel Networks P0857846 - Manual (Page 38)

Frequently used programming operations / 25
P0857846 Issue 02 Norstar-PLUS Modular ICS 2.0 System Coordinator Guide
Change the Do Not Disturb on Busy
feature
When you are on a call and a second call comes in, your telephone
rings softly to alert you to the second call. You can turn this feature on
or off for each telephone.
Begin the programming session
Change Do Not Disturb on Busy
Press
ƒ
.
Press
••¤flfl‹››
.
Press ¤‹fl›fl .
Press
≠
.
Enter the internal number (intercom number)
of the telephone extension. In this example,
it’s 225.
If the set has been given a name, it will appear on the display.
Press ≠ .
Press
≠
.
Press
‘
twice.
Press CHANGE to turn the feature on.
A second press will turn it off again. Press
® to end your session.
You can also press
‘
to continue programming capabilities for this
telephone, or press
–
three times to return to the Terminals and
Sets heading.