Nortel Networks P0857846 - Manual (Page 33)

20 / Frequently used programming operations
Norstar-PLUS Modular ICS 2.0 System Coordinator Guide P0857846 Issue 02
Changing the name of a line
Begin the programming session
Change the name of a line
Press ƒ .
Press
••¤flfl‹››
.
Press
¤‹fl›fl
.
Press ‘ .
Press ≠ .
Enter the three-digit number of the line
you want to name. In this example, it’s
line 002.
This is the name the display will show if you don’t change it.
Press ≠ .
Press CHANGE .
Decide what name you want to give to the line.
Press the telephone’s numeric dial pad
button that has the first letter of the name,
until the display shows the letter you
want.
Press --> .
Use the dial pad and --> until you have
the entire name.
The name can be up to 7 characters long, including spaces.
Press
‘
to use the name you
have entered.