Terminal panel features – NEC GT2000 User Manual

Page 11

Advertising
background image

E-11

Terminal Panel Features

This panel is located on the left side and is where you connect your
cables.

1

8

2

4

3

5

6

7

1 R/Cr, G/Y, B/Cb, H/ HV and V [RGB 1] Inputs (BNC)

Connect R,G,B,H (Horizontal sync) and V (Vertical sync)

outputs of external equipment such as the NEC ISS-6020
Switcher or IPS-4000.

If using a component with a combined sync (SYNC) output,

connect it to the H/V terminal. When using luminance and
color-difference signals of HDTV and DVD, connect Pr/Cr
to the R, Y to the G and Pb/Cb to the B input of the projector.

2 RGB (Y, Cb,Cr) Input 2 Connector (Mini D-Sub 15 pin)

Connect your PC, DVD player with Y/Cb/Cr outputs or

other RGB equipment such as IBM or compatible comput-
ers. The optional Component V. Cable is required for Y/Cb/
Cr input connection.

3 RGB Output Connector (Mini D-Sub 15 pin)

You can use this connector to loop your computer image to

an external monitor from either the RGB 1 or RGB 2 input
source.

4 S-Video Input

Here is where you connect the S-Video input from an exter-

nal source such as a VCR or laser disc player.

NOTE: S-Video provides more vivid color and higher
resolution than the traditional composite video format.

5 Left Channel/Mono Audio Input Jack (RCA)

This is your left channel audio input for stereo sound coming

from S-Video equipment or audio system. This also serves as
your monaural audio input.

Right Channel Audio Input Jack
This is your right channel audio input for stereo sound.

6 RGB 2 Audio Input Mini Jack

You can use this connector to output sound from the RGB 2

Input source.

7 RGB 1 Left Channel/Mono Audio Input Jack (RCA)

This is your left channel audio input for stereo sound coming

from the RGB Input 1 source.

This also serves as your monaural audio input.

RGB 1 Right Channel Audio Input Jack
This is your right channel audio input for stereo sound from

the RGB Input 1 source.

8 Remote 2/PC Connector (Mini D-Sub 15 pin)

Use this connector to attach an RS-232C cable when a

computer or similar device will control the projector or when
the projector is used with multiple projectors.

R/Cr

G/Y

B/Cb

H/HV

V

RGB

INPUT 2

RGB

OUTPUT

S-VIDEO INPUT AUDIO

VIDEO INPUT AUDIO

REMOTE 1

RGB 1 AUDIO

REMOTE 2/PC

EXT-CTL

RGB 2
AUDIO

AUDIO

OUTPUT

REMOTE

OUTPUT

REMOTE

INPUT

L/MONO

R

L/MONO

R

L/MONO

R

Advertising
This manual is related to the following products: