NEC GT2000 - Manual (Page 67)

E-67
Changing the Slot Number of the Switcher (Slot)
The slot number can be changed with user memory when the source setting is
RGB 1 / YCbCr 1 or RGB 2 / YCbCr 2.
1) Select [Source Edit]
→
[Slot], then press the ENTER button.
The switcher control display will appear.
2) Change the Switcher Control Condition
Press the cursor ▲/▼ button and select the slot number, then press the ENTER
button.
The display will change to the slot master display.
When [Standalone] is selected, the display returns to the editing menu.
3) Changing the Slot
Press the cursor ▲/▼ button and select the slot number, then press the ENTER
button.
The display will change to the slot slave display.
When [SW 1 Level] (one unit) is selected, the display will return to the editing
menu.
Press the cursor ▲/▼ button and select the slot slave number, then press the
ENTER button.
The display will return to the editing menu.
Changing the Image Mode (Image)
Select [Source Edit]
→
[Image], then press the ENTER button.
The image mode display will appear. See "Selecting the Image Mode" on Page
E-46.
Setting the Skip (Skip)
When the input signal is switched, the unit automatically performs a memory
search.
When a list number that you wish to skip has been set, the unit will skip over it.
1) Select [Source Edit]
→
[Skip], then press the ENTER button.
The skip display will appear.
2) Setting the Skip
Press the cursor ▲/▼ button and select On/Off.
On .... The setting will be beyond the object of the search. The line is
marked with an asterisk (*).
Off .... The setting will be the object of the search.
(To cancel, press the MENU button.)
Press the ENTER button.
The display will return to the edit menu.
Memory edit
Name
Slot
Image Mode
Skip
Source Lock
Sync Termination
Switcher Control
Standalone
SW 1 Level
SW 2 Level
Slot Master
Slot-01
Slot-02
Slot Slave
Slot-01
Slot-02
Memory edit
Name
Slot
Image Mode
Skip
Source Lock
Sync Termination
Skip
On
Off