E-54 – NEC GT2000 User Manual
Page 54
E-54
0
0
1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
13
i
m)
i
m)
0
0
1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
13
i
m)
i
m)
Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Filter
On
Off
Alignment
H Position
V Position
Picture Adjust
Fine Picture
H Amplitude
V Amplitude
Image Filter
Option
Auto Alignment
Option
V Phase
Skew Correction
Sync Position
Clamp Timing
Option
V Phase
Skew Correction
Sync Position
Clamp Timing
• Reducing Noise (Image Filter)
This function reduces video noise.
Select [Alignment]
→
[Image Filter] from the main menu, then press the
ENTER button. The image filter selection display will appear.
Select On/Off with the cursor ▲/▼ button.
On ........................ The low-pass filter is applied.
Off ........................ The filter is removed.
Screen adjustments are possible even when the filter is On.
Other Screen Adjustments (Vertical Phase, Skew Correc-
tion, Sync Position, and Clamp Timing)
Select [Alignment]
→
[Option] from the main menu, then press the ENTER
button. The option menu will be displayed.
• Vertical Phase
This function adjusts the vertical pixel phase when an irregularity arises while
making fine vertical movements of the screen or in the interlaced display.
Select [V Phase] with the cursor ▲/▼ button.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust to a normal condition with the cursor
ᮤ (–)/ ᮣ (+) button.
The adjustment range is from 0 to 7.
• Skew Correction
This function adjusts the vertical bending of the screen.
Select [Skew Correction] with the cursor ▲/▼ button.
When the item to be adjusted is selected, the adjustment value of the selected
item is displayed at the bottom edge of the display.
Adjust the bending with the cursor
ᮤ (–)/ ᮣ (+) button.
The adjustment range is from 0 to 8.