Remote control features – NEC GT2000 User Manual
Page 13
E-13
OFF
+
-
+
-
RGB1
ABC
DEF
GHI
JKL
MNO
PQR
STU
,.
LOAD
CLEAR
CONTRAST
SETUP
NORMAL
AUDIO
MUTE
EXPAND
FOCUS
ZOOM
W
T
DISPLAY
Adr.
VOLUME
BRIGHT
PICTURE
VWX
YZ?
RGB2 VIDEO/S-VIDEO
ON
POWER
MENU
ENTER
1
2
3
4
5
6
7
0
8
9
KEYSTONE
CTL
MAGNIFY/REDUCE
Remote Control Features
You can use your remote control with the cable or wireless to
operate your MultiSync GT2000/GT2000R LCD Projector.
If you want to use your remote control with the cable, connect
one end of the cable to the jack on the remote control and the
other end to the Terminal Panel.
1
5
2
4
6
8
7
9
1 Power ON and OFF
If your main power switch on the front is turned on, you can
use this button to turn your projector on and off.
2 Menu
Press this button to call up the On-Screen Menu so you can
adjust and set the image.
To return to the main menu from a submenu or to turn off the
main menu, press this button again.
3 Enter
This button activates items selected from the on-screen menu.
4 Cursor
Use this control to select items from the on-screen menu.
5 Input
Select your input source by pressing the RGB1, RGB2, or
VIDEO/S-VIDEO button. The VIDEO/S-VIDEO button
toggles between VIDEO and S-VIDEO. Also you can select
RGB or YCbCr directly by pressing CTL and RGB1(or RGB2)
buttons while you are in the RGB mode.
6 Number
Use one of these buttons to specify the memory location or
enter to name a signal during input registration.
7 Clear
Press this button to clear any adjustments in progress.
8 Load
Press any number button and then this button to activate set-
tings you have stored previously from 01 to 100 of the memory
list.
9 Volume (Address with CTL)
This adjusts the volume of the built-in speaker.
Use the Volume(-) with the CTL button to display the Remote
Control Unit Address on screen to specify the remote control
address.
3