Temporarily turning off the on-screen menu display, Using digital zoom function, Using digital enlargement – NEC GT2000 User Manual
Page 42: E-42, Ctl display expand, Zoom magnify/reduce w t
E-42
CTL
DISPLAY
EXPAND
0
0
1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
13
i
m)
i
m)
0
0
1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
13
i
m)
i
m)
Digital Zoom OFF
Digital Zoom ON
Each press enlarges the pic-
ture.
Each press reduces the pic-
ture (toward the original size)
ZOOM
MAGNIFY/REDUCE
W
T
0
0
1
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
10
11
12
13
i
m)
i
m)
+
-
2
3
4
5
6
i
m)
Temporarily Turning Off the On-screen Menu
Display
This function is used to temporarily turn off the on-screen
menu display.
This will be conveniently used when making fine picture or
screen adjustments while viewing the whole screen.
Hold down the CTL button and press the DISPLAY button.
This function will also be cancelled by pressing a button
other than the cursor ▲ / ▼ button, but the operation of the
button that is pressed will take effect.
Using Digital Zoom Function
The LCD panel of the projector has 1366
ן1024 pixels.
The digital zoom function converts input signals with resolu-
tions of less than 1366
ן1024 pixels to a number of pixels
that is close to 1366
ן1024 to provide an enlarged display.
A press of the EXPAND button results in a display that
corresponds to the resolution of the input signal.
A further press returns the display to the original condition.
NOTE: When the Digital Zoom function is set to ON, the picture
quality may deteriorate depending on the signal. The default
setting of Digital Zoom is ON. When the Digital Zoom function
is switched OFF, the Horizontal/Vertical amplitude and the
Keystone adjustment are not available.
Using Digital Enlargement
This function can provide an enlarged display of up to 8
times the size of a target portion. Hold down the CTL button
and press the ZOOM button. To move the selected portion,
use the cursor buttons.
CTL
The cursor buttons are used to move the screen position.