NEC GT2000 - Manual (Page 68)

E-68
Setting Auto Search Forced Lock (Source Lock)
When the input signal is switched, the unit automatically performs a memory
search.
This setting mandatorily invalidates auto search.
1) Select [Source Edit]
→
[Source Lock], then press the ENTER button.
The source lock display will appear.
2) Setting the Source Lock
Press the cursor ▲/▼ button and select On/Off.
On .... Auto search will be invalidated.
(Auto search will not be performed even when the input signal
changes.)
Off .... Auto search will be effective. (Normal)
(To cancel, press the MENU button.)
Press the ENTER button.
The display will return to the edit menu.
Sync Signal Termination Setting (Sync Termination)
This sets the termination resistance for the input sync of the RGB1/YCbCr1
Input connector.
Select [Source Edit]
→
[Sync], then press the ENTER button.
The sync termination display appears. See "Sync Signal Termination Setting"
on Page E-39.
Memory edit
Name
Slot
Image Mode
Skip
Source Lock
Sync Termination
Source Lock
On
Off