Troubleshooting 6 – NEC GT2000 User Manual

Page 77

Advertising
background image

E-77

TROUBLESHOOTING

6

This section helps you resolve problems you may encounter while setting up or using your MultiSync GT2000/GT2000R LCD

Projector.

Status Light Messages

Status

Ⅵ Normal

Ⅵ The projector lamp has exceeded 2000 hours of operation and

should be replaced.

Ⅵ Either the lamp cover or filter cover is not fastened properly.

Check each and reattach them if necessary.

Ⅵ The cooling fan has stopped. Contact your NEC dealer for service.

Ⅵ The lamp is not turned on.

• The projector was turned off and back on too quickly. Turn

off the projector, wait one minute, then turn the projector
back on. Or the lamp is burnt out.

Ⅵ Normal (The projector is used with the ISS-6020 switcher in

bundled operation.)

Ⅵ The projector is not connected with the ISS-6020.

Condition

OFF

On continually

Blinking very rapidly
(On and off in a cycle of 1 sec.)

Blinking slowly
(On and off in a cycle of 8 sec.)

Blinking very slowly
(On and off in a cycle of 12 sec.)

On continually

Blinking very slowly
(On and off in a cycle of 12
sec)

Red

Green

Advertising
This manual is related to the following products: