Poly octave (poly octave), Poly ring (poly ring modulator), Poly sg (poly slow gear) – Roland V-Bass VB-99 User Manual

Page 110: String modlng (string modeling)

Advertising
background image

110

Chapter 8 Parameters Guide POLY

POLY OCTAVE (Poly Octave)

This supports playing technique related to octaves.

POLY RING

(Poly Ring Modulator)

This enables you to mix the internal oscillator with the input sound
and apply a ring modulator independently for each string, creating a
sound with pitchless metallic reverberations.

POLY SG (Poly Slow Gear)

This creates a volume-swell (violin-like) effect independently for each
string.

STRING MODLNG

(String Modeling)

This converts the sound of a bass guitar strung with round-wound
strings to the sound of a bass with flat wound or black nylon strings.
COSM BASS settings other than E.BASS may not produce the expect-
ed results.

Parameter/
Range

Explanation

-1 OCTAVE LEVEL HiC, 1–4th, LowB

0–100

This adds sound one octave lower than the
original sound.

-2 OCTAVE LEVEL HiC, 1–4th, LowB

0–100

This adds sound two octaves lower than the
original sound.

DIRECT LEVEL HiC, 1–4th, LowB

0–100

Adjusts the level of the original sound.

Parameter/
Range

Explanation

MODE

This selects the operation of the ring modulator.

NORMAL

This is the normal ring modulator.

INTELLIGENT

This changes the oscillator frequency ac-
cording to the pitch of the input sound. Un-
like NORMAL, this produces sound that
has pitch.

FREQ (Frequency)

0–100

Adjusts the frequency of the internal oscilla-
tor.

DISTORTION

This effect makes the effect sound of the ring modulator more
extreme.

DRIVE

0–100

Adjusts the depth of distortion.

TONE

-50–+50

Adjusts the tone.

LEVEL

0–100

Adjusts the volume of the distortion sound.

EFFECT LEVEL HiC, 1–4th, LowB

0–100

Adjusts the volume of the effect sound.

DIRECT LEVEL HiC, 1–4th, LowB

0–100

Adjusts the volume of the direct sound.

Parameter/
Range

Explanation

RISE TIME

0–100

Adjusts the time needed for the volume to
reach its maximum from the moment you
begin playing.

SENS (Sensitivity)

0–100

Adjusts the sensitivity.
When set to a lower value, the slow gear ef-
fect is only triggered with strong playing.
When set to a higher value, the slow gear ef-
fect can be triggered with both weak and
strong playing.

Parameter/
Range

Explanation

STRING TYPE HiC, 1–4th, LowB

OFF

No conversion is performed.

FLAT WOUND

Converts sound to that of flat wound
strings.

BLACK NYLON

Converts sound to that of black nylon
strings.

STRING LEVEL HiC, 1–4th, LowB

0–100

Specifies the output level of each string.

VB-99_e.book 110 ページ 2008年8月18日 月曜日 午後1時10分

Advertising
This manual is related to the following products: