Roland V-Bass VB-99 - Manual (Page 12)

12
Names of Things and What They Do
fig.00-020
1. D BEAM
Switches the D Beam on and off. You can add a variety of
effects to your sounds by moving your hand or the bass neck
within the range of the beam. (p. 71)
• PITCH Button
In addition to changing the pitch of the bass, this can be
used for the Freeze function, which continuously holds
the bass’s tone. (p. 73)
• FILTER Button
This changes the bass’s tone. (p. 75)
• ASSIGNABLE Button
Use this to assign different parameters and functions to
the D Beam and change the tone in real time. (p. 77)
2. LCD
Various information regarding the VB-99 is indicated here.
3. PATCH/VALUE Dial
Used to switch patches and change settings values.
4. CATEGORY Button
Used to select and change categories. (p. 85)
5. FUNCTION Knob F1–F6
Changes the value of the setting for the parameter indicated in
the LCD.
6. FUNCTION Buttons F1–F6
Used to select the parameters indicated in the LCD.
7. BASS DIRECT Button
This outputs only the normal pickup sound. (p. 27)
8. COSM BASS Buttons
These set the COSM bass type and tone. (p. 26)
9. POLY FX (Poly Effects) Buttons
These set the poly effects. (p. 28)
10. FX (Effects) Buttons
These set the effects. (p. 28)
11. COSM AMP Buttons
Used to make settings for the COSM amp. (p. 27)
12. MIXER Buttons
Used to make settings for the mixer. (p. 31)
13. DELAY/REVERB Button
Used to make settings for the mixer section’s delay and
reverb. (p. 32)
14. DYNAMIC Button
Used for setting the dynamics. (p. 32)
Top Panel
3
4
30
7
8 9 10 11 12
13 14
15
16
17
18
19
20 21 22
27
29
23 24
28
25
26
33
31
32 1 2
5
6
VB-99_e.book 12 ページ ２００８年８月１８日 月曜日 午後１時１０分