Roland V-Bass VB-99 - Manual (Page 80)

80
Chapter 7 Other Functions
4. If you want to save the edited settings,
perform the Write procedure (p. 34).
* If you do not want to save, press [EXIT] to return to the Play screen.
About the Range of Targets’ Change
The target’s value changes between MIN (the minimum value)
and MAX (the maximum value).
When a foot switch or other controller that switches settings on
and off is used, OFF sets the minimum value and ON sets the
maximum value.
When an expression pedal or other controller that changes
values in a consecutive manner is used, the value changes
within the range between MIN and MAX.
When an expression pedal or other controller that changes
values in a consecutive manner is used to control a two-value
(On/Off) parameter, the controller functions as shown below.
MIN
MAX
Off On
Footswitch
Value
Allo
w
a
b
le P
a
rameter
Settings Range
0 127
Degree to
Which Expression
Pedal Is Depressed
EXP Pedal
When the pedal
is fully raised
When the pedal
is fully advanced
MIN
MAX
Value
Allo
w
a
b
le P
a
rameter
Settings Range
0 127
EXP Pedal
When the pedal
is fully raised
When the pedal
is fully advanced
When the pedal
is advanced halfway
OFF
ON
Value
Degree to
Which Expression
Pedal Is Depressed
About the Range of Controllers’ Change
This sets the operational range (range in which the value
actually changes) for an expression pedal, or similar controller
that changes the value of a setting in a continuous fashion,
when it has been set as the source.
If the controller adjustment moves beyond the enabled range of
operation, the value of the setting remains at the maximum
value or minimum value, without changing any further.
0 127 RANGE
LOW
RANGE
HIGH
MIN
MAX
Value
Degree to
Which Expression
Pedal Is Depressed
Allo
w
a
b
le P
a
rameter
Settings Range
VB-99_e.book 80 ページ ２００８年８月１８日 月曜日 午後１時１０分