Roland V-Bass VB-99 - Manual (Page 82)

82
Chapter 7 Other Functions
To save any changes you’ve made in the settings, you need to
perform the write procedure.
To make a copy of an existing patch, you can simply write it to
another patch location.
1. Press [WRITE].
The PATCH WRITE screen appears.
“WRITE TO” is displayed, and the write-destination patch
number and name are indicated.
2. Use the PATCH/VALUE dial to select the copy-
destination patch.
3. Press [WRITE] again.
The message “NOW WRITING...” is displayed as the patch is
copied, and the VB-99 changes to the copy-destination patch
number.
* If you are not saving the settings, press [EXIT] to return to the Play
screen.
This exchanges the user patch with the different patch.
* You cannot exchange tones in preset patches.
1. Confirm that a User patch is selected.
2. Press [WRITE].
3. Press PAGE [ ] to go to Page 2.
“EXCHANGE” is displayed.
The exchange-destination patch number and name are
indicated.
4. Use the PATCH/VALUE dial to select the
exchange-destination patch.
5. Press [WRITE] again.
The message “NOW EXCHANGING...” is displayed as the
current patch and the selected patch are exchanged, and the VB-
99 changes to the exchange-destination patch number.
* If you do not want to exchange the patches, press [EXIT] to return to
the Play screen.
Managing the Patches
Saving and Copying Patches
(PATCH WRITE)
Exchanging the Current Patch
with a Different Patch (PATCH
EXCHANGE)
VB-99_e.book 82 ページ ２００８年８月１８日 月曜日 午後１時１０分