Rockwell SoniCrafter DEVICENET 1771-SDN - Manual (Page 120)

Publication 1771-6.5.132 - June 2000
C-2 Installing and Configuring the DH+ Communications Driver
Configuring the 1784-KTX
Communications Driver After installing the card in the computer, you must run RSLinx to
configure the communications driver.
1. Start the RSLinx software.
2. From the Communications menu select Configure Drivers.
The Configure Drivers window will appear:
3. From the list of Available Drivers, select the
1784-KT/KTX(D)/PKTX(D) driver from the pull-down list and
click on Add/New.
4. When prompted for a name for the new driver, select the default
name assigned by the system, AB_KT-1.
The device’s configuration window will open: