Rockwell SoniCrafter DEVICENET 1771-SDN - Manual (Page 96)

Publication 1771-6.5.132 - June 2000
6-2 Creating and Running the Example Application Program
Installing the Software Install the RSLogix 5 software.
1. Insert the CD in the CD-ROM drive.
Note: The CD-ROM supports Windows Autorun. Once inserted into
the CD-ROM drive, if you have Autorun configured, the installation
will automatically start at the first setup screen.
If Autorun is not configured for your CD-ROM drive, go to step 2.
2. From the Start menu, choose Run.
You will see the Run pop-up window.
3. Type d:/setup (if it doesn’t appear automatically), where d: is your
CD-ROM driver letter.
4. Click on OK.
You see the progress bar, followed by the welcome screen.
Creating the Example
Application Program Perform the following steps to create the example application
program.
1. Start RSLogix 5.
2. From the File menu select New.