Roland XP-30 - Manual (Page 123)

123
Chapter 4. Memory Settings (Utility/Card Mode)
Chapter 4
Recalling Factory Default
Settings (FACTORY RESET)
This operation will restore all the data in the XP-30 to the
factory settings.
* If the XP-30 internal memory already contains important data
that you have created, this operation will cause all of this data to
be lost. If you wish to keep the data, you must save it on an
optional memory card (p. 122) or on an external MIDI
sequencer (p. 119).
fig.4-40
* If Internal Write Protect is turned ON, the following display
will appear, and the Factory Reset operation will not be
executed.
fig.3-22
Change the displayed ON to OFF and press [ENTER] to turn
Internal Write Protect off.
“Are You Sure?” will be displayed, press [ENTER].