Roland XP-30 - Manual (Page 136)

136
Chapter 6. Getting the Full Potential of the XP-30
3. Use a MIDI cable (sold separately) to connect the MIDI OUT connector of the MIDI interface to
the MIDI IN connector of the XP-30.
4. Use a MIDI cable to connect the MIDI IN connector on the MIDI interface to the MIDI OUT
connector on the XP-30.
* This connection is necessary in order to use the controller section (keyboard section) of the XP-30.
fig.6-07.e
Modem or
Printer Port
MIDI Interface Adapter
IN
MIDI
O U T
The setting
is MIDI
Apple Macintosh
PC Super MPU64
USB
Cable
USB
Connector
XP-30 Rear Panel
The setting
is MIDI
XP-30 Rear Panel