Roland XP-30 - Manual (Page 150)

150
Parameter List
■ Performance Parameters
* Parameters that can be set independently for each Part are indicated by “P.”
COMMON Group (p. 83)
Display Parameter Value
PERFORM NAME — Performance name ASCII Characters (max. 12)
PERFORM CLOCK Source Performance clock source PERFORM, SYSTEM
Tempo Performance tempo 20–250
PERFORM COMMON Key Mode Key mode LAYER, SINGLE
Key Range key range switch OFF, ON
KEY RANG Lower Key range lower C-1–Upper P
Upper Key range upper Lower–G9 P
KEYBOARD Octave Shift Octave shift -3–+3 P
EFFECTS Group (p. 84)
Display Parameter Value
OUTPUT Output Assign Output assign MIX, EFX, PATCH P
Output level 0–127 P
Chorus Chorus send level 0–127 P
Reverb Reverb send level 0–127 P
PERFORM EFX TYPE Type EFX type (*1)
Source EFX source PERFORM, 1–9, 11–16
PERFORM EFX PRM (*1) Performance EFX parameters
PERFORM EFX OUT Mix Out EFX output level 0–127
Chorus Chorus send level 0–127
Reverb Reverb send level 0–127
PERFORM EFX CTRL EFX control source 1 (*2)
EFX control depth 1 -63–+63
EFX control source 2 (*2)
EFX control depth 2 -63–+63
PERFORM CHORUS Rate Chorus rate 0–127
Depth Chorus depth 0–127
Delay Chorus pre delay 0–127
Fbk Chorus feedback level 0–127
Level Chorus level 0–127
Out Chorus output assign MIX, REV, M+R
PERFORM REVERB Type Reverb/Delay type ROOM1, ROOM2, STAGE1, STAGE2, HALL1, HALL2, DELAY, PAN-DLY
Time Reverb/Delay time 0–127
Fbk Delay feedback level 0–127
HF Damp Reverb/Delay HF damp (*3)
Level Reverb/Delay level 0–127
*1: Refer to EFX parameters.
*2: OFF, SYS-CTRL1, SYS-CTRL2, MODULATION, BREATH, FOOT, VOLUME, PAN, EXPRESSION, PITCH BEND, AFTERTOUCH
*3: 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000 Hz, BYPASS
MIDI Group (p. 86)
Display Parameter Value
MIDI Channel MIDI channel 1–16 P
Rx Receive switch OFF, ON P
Tx Transmit switch OFF, ON P
Local Local switch OFF, ON P
RxSWITCH Volume Receive volume switch OFF, ON P
Hold-1 Receive hold-1 switch OFF, ON P
Program Change Receive program change switch OFF, ON P
TRANSMIT BankSelectGroup Transmit bank select group PATCH, BS1–BS7 P
Transmit Volume Transmit volume 0–127, OFF P