Roland XP-30 - Manual (Page 133)

133
Chapter 6. Getting the Full Potential of the XP-30
Chapter 6
Selecting Patches
The MIDI messages transmitted by the external MIDI device
will be received by the XP-30 to select Patches as shown in
the following table.
Group Number Bank Select Program Number
MSB LSB
USER 1–128 80 0 1–128
PR-A 1–128 81 0 1–128
PR-B 1–128 81 1 1–128
PR-C 1–128 81 2 1–128
PR-D (GM) 1–128 81 3 1–128
PR-E 1–128 81 4 1–128
XP-A 1–128 84 0 1–128
XP-A 129–255 84 1 1–127
XP-B 1–128 84 2 1–128
XP-B 129–255 84 3 1–127
XP-C 1–128 84 4 1–128
XP-C 129–256 84 5 1–128
XP-D 1–128 84 6 1–128
XP-D 129–256 84 7 1–128
XP-E 1–128 84 8 1–128
XP-E 129–256 84 9 1–128
<Example>
Selecting PR-B Patch number 10 from an external MIDI
device
Transmit data to the XP-30 in the following order. (Values
are in decimal.)
Controller number 0 (Bank Select MSB button), value 81
Controller number 32 (Bank Select LSB button), value 1
Program number 10
Selecting Performances
The MIDI messages transmitted by the external MIDI device
will be received by the XP-30 to select Performances as
shown in the following table.
Group Number Bank Select Program Number
MSB LSB
USER 1–32 80 0 1–32
PR-A 1–32 81 0 1–32
PR-B 1–32 81 1 1–32
In order to select a Performance, the MIDI channel of the
transmitting device must match the XP-30’s Control Channel
parameter (SYSTEM/MIDI/PERFORM MIDI). In order to
select the Patch or Rhythm Set of a Part, the transmit channel
must match the receive channel of the Part. However if the
Control Channel parameter and the receive channel of a Part
have the same setting, the Control Channel parameter setting
will take priority so that messages received on this channel
will select Performances.
Selecting Rhythm Sets
The MIDI messages transmitted by the external MIDI device
will be received by the XP-30 to select Rhythm Sets as shown
in the following table.
Group Number Bank Select Program Number
MSB LSB
USER 1, 2 80 0 1, 2
PR-A 1, 2 81 0 1, 2
PR-B 1, 2 81 1 1, 2
PR-C 1, 2 81 2 1, 2
PR-D (GM) 1, 2 81 3 1, 2
PR-E 1, 2 81 4 1, 2
XP-A 1–8 84 0 1–8
XP-C 1–8 84 4 1–8
XP-D 1–128 84 6 1–128
XP-D 129–256 84 7 1–128
XP-E 1–128 84 8 1–128
XP-E 129–256 84 9 1–128
In order to select Rhythm Sets, the MIDI channel of the
transmitting device must match the receive channel of Part
10 of the Performance. When the XP-30 is shipped, Part 10 is
set to MIDI channel 10.