Set up and basic operations, Getting ready to switch on the power, Making the connections – Roland MMP-2 User Manual
Page 12: This is for connecting the power cable. (p. 12)
12
Set Up and Basic Operations
This chapter introduces the basic functions of the MMP-2 in the following order, which you should follow
in getting started with your new unit.
Read through this in sequence as you try things out for yourself.
Getting Ready to Switch on the Power
■
Making the Connections
fig.e.BasicConnect.eps
Refer to the figures and the following explanation to connect the equipment you’re using.
For information about digital connections, please read “Settings for Digital Connections” (p. 26).
To prevent problems, including malfunction and damage to speakers, turn the volume down
completely and turn off the power for all the devices being connected before making the
connections.
fig.e.PowerConnect.eps
Connecting the Power Source
Use the included power cable to connect the unit with a power
source.
Getting Ready
to Switch on the Power
Switching on
the power
Global
Functions
Adjusting
the Input
Switching off
the power
MMP-2
recorder
microphone
MMP-2
power
MMP-2
rear panel
power cable