Roland MMP-2 - Manual (Page 40)

40
Use of computer and setup
fig.WelcomeToFreeMidi.eps
4. The first time FreeMIDI is started up, a “Welcome to
FreeMIDI!” dialog box will appear. Click [Continue].
If this is the second or later time, select “FreeMIDI
Preferences” from the File menu.
fig.FreeMidiPreferences.eps
5. In the “FreeMIDI Preferences” dialog box, check
“MMP-2 Port” which is located below MMP-2 Driver in
MIDI Configuration, and click [OK].
* If the dialog box does not show “MMP-2 Driver,” check whether
the MMP-2 is connected correctly, and start up FreeMIDI
Setup once again.
fig.AboutQuickSetup.eps
6. The About Quick Setup dialog box will appear.
Click [Continue].
* If the About Quick Setup dialog box is not displayed, select
Quick Setup... from the Configuration menu.
fig.NewDevice.eps
7. Confirm the studio location is set “MMP-2” and click
[>>Add>>]. “Device1” will be added in right column.
8. Click [Done].