P. 31, Windows me / 98 – Roland MMP-2 User Manual
Page 31
31
Use of computer and setup
Use of computer and setup
OMS or FreeMIDI is a driver to let MacOS to communicate with external devices on MIDI
protocol. USB-MIDI driver is the driver that makes the communication on OMS or FreeMIDI
through USB possible.
You can download OMS from the Web site of Opcode Systems, Inc.
You can download FreeMIDI from the Web site of Mark of the Unicorn, Inc.
Windows Me / 98
Use the following procedure to install the MMP-2 driver.
* Disconnect the MMP-2 from your computer before starting up Windows.
* If the MMP-2 is already connected to your computer and a message of “Add New Hardware Wizard” is displayed, go to the
MMP-2 Driver & Software CD-ROM, open the file Driver\WinMe_98\Readme_e.htm, and read the “Troubleshooting”
section entitled “You attempted to install using the above procedure, but were not able to.”
1.
With all USB cables disconnected, start up Windows. (except the keyboard and mouse)
2.
Exit all applications before you begin installing the driver.
3.
Insert the MMP-2 Driver & Software CD-ROM into the CD-ROM drive.
fig.013
4.
From the Windows Start menu, select “Run.”
fig.014
5.
In the “Open” field of the dialog box that appears, enter
“Q:\Driver\WinMe_98\Setupinf.exe” and click “OK.”
* Enter the drive name Q: appropriate for the drive name of your
CD-ROM drive.
* To check the drive name of your CD-ROM drive, double-click
the My Computer icon.
fig.01-08
6.
The SETUPINF dialog box will appear, and the display
will indicate “Ready to install the driver.-”
* If the “Ready to install the driver.—” dialog box does not
appear, go to the MMP-2 Driver & Software CD-ROM, open
the file Driver\WinMe_98\Readme_e.htm, and read the section
entitled “Installation.”
* If the display indicates “The driver is already installed.-”, you
can connect the MMP-2’s USB cable to the computer and use it.
* If the display indicates “The driver was not deleted completely.-”,
refer to “Deleting the MMP-2 Driver”(p. 32) to re-install it.
Q:\Driver\WinMe_98\Setupinf.exe
Q:\DRIVER\WINME_98
MMP-2.
MMP-2