Top and rear panels, Top panel – Roland MMP-2 User Manual
Page 9
9
Top and Rear Panels
Top and Rear Panels
Top Panel
1.
[METER] Button
This changes the meter display. (p. 16)
2.
[PATCH] Button
This performs Select, Store, and Reset operations for patches. (p. 14)
3.
[SYSTEM] Button
This accesses Clock, USB, and other functions. (“Sampling Clock Source” (p. 26), “MMP-2 settings” (p. 30))
You can also adjust the contrast of the LCD screen by holding down [SYSTEM] and turning the right
Value control. (p. 14)
4.
[ENTER] Button
This confirms operations.
You also use this when you want to save a change right away. (“Save pressing [ENTER] button” (p. 14))
5.
[PAGE] Buttons
These scroll the screen a page at a time.
6.
Value Controls
These edit parameter values. The items shown on the display correspond to the controls below the screen.
These are the left, center, and right Value controls.
7.
[MIC IN] Jacks
These are balanced XLR/phone input jacks. (p. 13)
8.
[PAD] Switches
Pressing one of these attenuates the signal input to the corresponding MIC IN jack by 20 dB. (p. 17)
9.
[SENS] Controls
14
16 17
15
13
14
16 17
15
13
12
12
7
7
8
8
9
9
10
10
11
11
5
5
5
5
4
4
3
3
2
2
1
1
6
6