Roland MMP-2 - Manual (Page 39)

39
Use of computer and setup
Use of computer and setup
fig.e.FmDriverEInstaller.eps
2. Click [Install].
If the dialog box that all other currently-running
applications will be exited appears, click [Continue].
fig.e.QuitRunningApplicatio.eps
3. If the following message appears, click [Continue] and
all other currently-running applications will be exited,
and installation will continue.
fig.e.InstallSuccessRestart.eps
4. When installation is completed, the following dialog
box will appear. Click [Restart] to restart your
Macintosh.
FreeMIDI settings
1. Use the USB cable to connect the MMP-2 and your computer.
fig.e.MMP2-USB-PC.eps
2. Turn on the power of the MMP-2.
* Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices
in the wrong order, you risk causing malfunction and/or damage to speakers and the other devices.
3. Open the “FreeMIDI Applications” folder, and double-click the “FreeMIDI Setup” icon.
USB cable
USB connector
MMP-2