Roland MMP-2 - Manual (Page 34)

34
Use of computer and setup
fig.003
8. From the Windows Start menu, select “Run.”
fig.004
9. In the “Open” field of the dialog box that appears, enter
“Q:\Driver\Win2000\Setupinf.exe” and click [OK].
* Enter the drive name Q: appropriate for the drive name of your
CD-ROM drive.
* To check the drive name of your CD-ROM drive, double-click
the My Computer icon.
10. The SETUPINF dialog box will appear, and the display
will indicate “Ready to install the driver.-”
* If the “Ready to install the driver.—” dialog box does not
appear, go to the MMP-2 Driver & Software CD-ROM, open
the file Driver\WinMe_98\Readme_e.htm, and read the section entitled “Installation.”
* If the display indicates “The driver is already installed.-”, you can connect the MMP-2’s USB cable to the computer and use it.
11. Use the USB cable to connect the MMP-2 and your computer.
fig.02-01.e
12. After completing the connections between the MMP-2 and your computer, turn on your computer and
start up Windows, and then turn on the MMP-2.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all
devices before making any connections.
fig.01-04
13. The “Insert Disk” dialog box will appear.
Click the “OK” button.
Q:\Driver\Win2000\SETUPINF.EXE
USB cable
USB connector
MMP-2
'Roland
MMP-2 USB Driver Installation Disk'