Roland MMP-2 - Manual (Page 29)

29
Other Features
Other Features
2. Press [PAGE] button several times to display “RECOVER” on screen.
3. Operate external devices like computer to start sending/receiving signal.
■ Route
Select one of the following routings from input to output. Take “NORM” as a normal rule.
1. Press the [SYSTEM] button several times to display “ROUTE.” The button lights up in orange.
2. Turn the right Value control to make the selection.
“NORM”: The normal routing.
“P IN”: This divide signal flow into two routes. DSP* can be inserted into
each route individually. This would be suitable for creating “Channel divider” which divides
audio signal into various outputs according to its frequency range.
“P OUT”: This divides signal flow into two routes after DSP* insertion. Two divided signals must
always be same.
* DSP: digital signal processor.
■ Initializing
This returns the contents of memory to their factory defaults.
Initializing erases any parameters or patches you have set yourself. Once they are lost, they
cannot be recovered. Save your settings to a computer if you want to save them before
initializing. (“Backup Patch” (p. 28), “Use of computer and setup” (p. 30))
fig.LcdInitializeSystem.eps
1. Press the [SYSTEM] button a number of times, until it lights in orange.
fig.LcdInitializeSystem.epsMMP10
2. Press the [PAGE] buttons several times until the message “INITIALIZE”
appears.
3. Use the left Value control to choose the target for the initializing.
“SYSTEM”:
system parameters
“USER PATCHES”:user’s effect patches
“ALL”:
both
4. Press [ENTER]. Your confirmation will be requested.
5. Re-press [ENTER]. The system will be initialized. Once it's initialized, system
go back to normal screen after indicating [Completed] on screen.
* If you don’t want to initialize, press any button other than [ENTER] .
MIC IN 1 DSP
DIGITAL IN
MIC IN 2 LINE OUT 2
DIGITAL OUT DSP
DIGITAL IN
MIC IN 1
DIGITAL OUT
LINE OUT 1
DIGITAL OUT
LINE OUT 1
DIGITAL OUT
LINE OUT 1
DSP PHANTOM,SENS,PAD
DIGITAL IN
MIC IN 2 LINE OUT 2
DIGITAL OUT DSP PHANTOM,SENS,PAD
PHANTOM,SENS,PAD
PHANTOM,SENS,PAD
PHANTOM,SENS,PAD
DIGITAL IN
MIC IN 1 DSP
DIGITAL IN
MIC IN 2 LINE OUT 2
DIGITAL OUT DSP
DIGITAL IN
NORM
P IN
P OUT
PHANTOM,SENS,PAD