Roland MMP-2 User Manual
Page 36
36
Use of computer and setup
fig.e.OmsDriverEInstallIcon.eps
1.
In the “MMP-2 Driver E” folder of the CD-ROM, double-click the “MMP-2 OMS
Driver-E Installer” icon.
fig.e.OmsDriverEInstaller.eps
2.
Make sure that OMS is already installed in the location
where the driver will be installed, and click [Install].
fig.e.QuitRunningApplicatio.eps
3.
If the following message appears, click [Continue] and
all other currently-running applications will be exited,
and installation will continue.
fig.e.InstallSuccessRestart.eps
4.
When installation is completed, the following dialog
box will appear. Click [Restart] to restart your
Macintosh.
OMS settings
1.
Use the USB cable to connect the MMP-2 and your computer.
fig.e.MMP2-USB-PC.eps
2.
After completing the connections between the MMP-2 and your computer, turn on your computer and
start up Mac OS, and then turn on the MMP-2.
* Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices
in the wrong order, you risk causing malfunction and/or damage to speakers and the other devices.
3.
In the “Opcode” folder in the location where OMS is installed, open the “OMS Applications” folder, and
double-click the “OMS Setup” icon.
USB cable
USB connector
MMP-2