Regency Bellavista Gas Fireplace B36X - Manual (Page 40)

40
Regency Bellavista™ B36X Gas Fireplace
INSTALLATION
CONVERSION KIT# 556-969 FROM NG TO LP
for B36X using SIT 820 NOVA Gas Valve
THIS CONVERSION MUST BE DONE BY A QUALIFIED GAS FITTER
IF IN DOUBT DO NOT DO THIS CONVERSION !!
1) Shut off the gas supply.
2) Remove the louvers (and Arch screen
doors if they are installed).
3) Open the fl ush door and remove the
door.
4) Remove the logs and embers (if already
installed).
5) Remove the 2 screws holding the Burner
Assembly to the fi rebox base. Slide the
Burner Assembly to the left to release it
from the orifi ce and lift out.
Remove the 2 screws, push Burner Assembly
to the left and lift out.
9) Unscrew the pilot orifi ce with the allen
key; then replace with the LPG pilot
orifi ce, provided in the kit.
7) Remove the wire clip below the pilot cap.
10) Remove burner orifi ce with a 1/2"
wrench. Use another wrench to hold on
to the elbow behind the orifi ce. Discard
orifi ce.
11) Reinstall new burner orifi ce LPG
stamped #55 and tighten.
Each Kit contains one LP
Conversion Kit # 556-969
Conversion Kit Contains:
Qty. Part #
Description
1 904-575 Burner Orifi ce #55
1 904-529 5/32" Allen Key
1 918-590 Decal "Converted
to LPG"
1 908-528 Red "LP" label
1 910-037 LP Injector (Pilot Orifi ce)
1 910-073 Spark Generator
1 910-074 Spark Generator Wires
1 'AA' Battery
1
918-775 Instruction Sheet
8) Pull off the pilot cap to expose the pilot
orifi ce.
6) Remove the 2 screws securing the rear
log tray and lift out.
Installation of LP
Conversion Kit: