Roberts Gorden Vacuum Assisted Linear - Manual (Page 54)

B LACKHEAT ® I NSTALLATION O PERATION AND S ERVICE M ANUAL
48 of 74
10.7 Wall Mounting
Install wall mounting brackets at the height shown in the
layout drawing provided by the estimator. Space wall
mounting brackets and hangers as indicated by
dimensions d, e and f (u-tube) in the relevant layout
overview drawing for your heater. For linear heaters
see
Page 15, Figure 20, for double linear heaters see Page
18, Figure 22 and for U-tube heaters see Page 28, Figure
24.
10.7.1 Hardware Installation
The wall mounting brackets must be attached to a
suitable wall through all mounting holes. Screw sizes less
than M8 (5/16") may not be used. In order for the wall
mounting brackets to adequately carry the weight of the
heater, it must be installed with best building practice.
Figure 27: U-Tube (Horizontal)
Model
Quantity of Wall
Mounting Brackets
Model
Quantity of Wall
Mounting Brackets
BH15UT 2 BH15ST 3
BH20UT 3 BH20ST 4
BH25UT/EF 3 BH25ST/EF 4
BH30UT/EF 3 BH30ST/EF 5
BH35UT/EF 3 BH35ST/EF 5
BH40UT/EF 3 BH40ST/EF 5
BH45UT/EF 4 BH45ST/EF 6
BH50UT/EF 4 BH50ST/EF 6