Runco LIGHTSTYLE LS-10I - Manual (Page 101)

External Control
Runco LS-10i Installation/Operation Manual 85
PRE
L
IMINAR
Y
msgbox = ? 0 = On
1 = Off This control enables or
disables the display of
power off, source and
adjustment message
boxes (brightness,
contrast etc.). Default
value is ON.
cal.text1
cal.text2
cal.text3 = Up to 30 characters. The LS-10i start-up
screen is customizable
with three lines of text of
up to 30 characters each.
This text appears below
the “CALIBRATED FOR:”
text in the logo screen.
The allowable characters
are all numbers, letters
(uppercase and
lowercase), spaces, and
symbols available in the
ASCII code set.
Table 6-2. Serial Commands (continued)
Operation Commands Values Notes