Runco LIGHTSTYLE LS-10I - Manual (Page 105)

Specifications
Runco LS-10i Installation/Operation Manual 89
PRE
L
IMINAR
Y
7.1
LS-10i Specifications Table 7-1 lists the LS-10i specifications.
7. Specifications
Table 7-1. LS-10i Specifications
Projector Type: Digital Light Processing™ (DLP), 3-chip, 16:9
SuperOnyx™ DMD™
Video Processing: Runco advanced ViVix processing with 10 bit
independent dual channel image processing, true 1080i
deinterlacing, latest motion adaptive processing, 3D
noise reduction, detail enhancement, rich color
processing and noise reduction, less than one frame
latency
Native Resolution: 1,920 x 1,080 (2,073,600 pixels)
Aspect Ratios: 16:9, Letterbox, 4:3, VirtualWide, Cinema, Virtual
Cinema (Anamorphic lens compatible)
Projection Modes: Front, Rear, Ceiling (front/rear)
Video Standards: NTSC, PAL, SECAM, CEA-861D
DTV Compatibility: 480i, 480p, 576i, 576p, 720p, 1080i 50/60,
1080p 24/50/60
Picture Size (16:9 Screen): Recommended Width: 72 - 120 in.
Maximum Width: 180 in.
Throw Distance
(Factor x Screen Width): Refer to Table 3-3
Lens System: Motorized focus, zoom, vertical and horizontal shift
Vertical Lens Shift Range: Proteus 1: None
Proteus 2, 3, 4, 5, 6:
65% of screen height above or below lens center
(130% of one half of the screen height)
Horizontal Lens Shift Range: Proteus 1: None
Proteus 2, 3, 4, 5, 6:
30% of screen width left or right of lens center
(60% of one half of the screen width)
Lamp: 230/260W (selectable) HPM lamp
Estimated Lamp Life: 2000 hours, typical (260W power setting);
3000 hours, typical (230W power setting);
Cooling Performance: High efficiency adaptive voltage side-to-side cooling
with low system acoustic noise level and low light
pollution cabinet
Calibration: ISF Certified Calibration Configuration
Color Gamut: > BT.709 (REC709)