Pre l iminar y – Runco LIGHTSTYLE LS-10I User Manual
Page 27
Runco LS-10i Installation/Operation Manual
11
PRE
L
IMINAR
Y
7.
Aspect Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
16:9
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.
4:3
Scales the input signal to fit 4:3 display mode in the center of the screen.
LBOX (Letterbox)
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.
VWIDE (VirtualWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 source material.
VCINE (Virtual Cinema)
Selects the Virtual Cinema aspect ratio, used for viewing 16:9 source material on a
2.35:1 screen.
8.
0 - 9
Use these keys to enter numeric characters.
9.
Motorized Lens Controls:
FOCUS
To focus the image, press FOCUS. Then, press and hold the up (
) or down (
)
button. When finished, press MENU or EXIT.
ZOOM
To adjust the projected image size, press ZOOM. Then, press and hold the up (
)
button to zoom in (enlarge) or the down (
) button to zoom out (reduce). When
finished, press MENU or EXIT.
LENS (Lens Shift)
To adjust the lens position, press LENS. Then, press and hold the right (
), left (
),
up (
) or down (
) button. When finished, press MENU or EXIT.
➤
➤
➤
➤
➤
➤
➤
➤