Runco LIGHTSTYLE LS-10I - Manual (Page 93)

External Control
Runco LS-10i Installation/Operation Manual 77
PRE
L
IMINAR
Y
0x1d cur.down Keypad down arrow.
0x44 cur.up Keypad up arrow.
0x1c cur.left Keypad left arrow.
0x48 cur.righ Keypad right arrow.
0x06 bright Bring up or cancel brightness slider.
0x05 contrast Bring up or cancel contrast slider.
0x04 color Bring up or cancel color slider.
0x03 tint Bring up or cancel tint slider.
0x5f isf.nigh Changes to ISF Night preset.
0x07 isf.day Changes to ISF Day preset.
0x4b mem.1 Changes to Custom 1 preset.
0x4a mem.2 Changes to Custom 2 preset.
0x42 asp.16.9 Apply 16:9 aspect ratio to the active source.
0x46 asp.4.3 Apply 4:3 aspect ratio to the active source.
0x52 asp.lett Apply Letterbox aspect ratio to the active source.
0x43 asp.vwide Apply VirtualWide aspect ratio to the active source.
0x01 asp.cin Apply Cinema aspect ratio to the active source.
0x47 asp.vcin Apply VirtualCinema aspect ratio to the active
source.
Table 6-1. Serial Command Key Names and IR Codes (continued)
IR Code
RS232
Keyname
Remote Button Description
◄
◄
◄
◄
BRT
CONT
COL
TINT
IS F
NIGHT
IS F
DAY
CUS T1
CUS T2
16:9
4:3
LBOX
VWIDE
CINE MA
VCINE