Ricoh RDC-5000 - Manual (Page 115)

113
Miscellaneous
5
Playing
Use the remote control unit to playback recorded files.
q
Set the mode dial to [ ] and press the
CARD/IN button to select a recording
destination.
The most recently recorded file will be played
back.
See “Playback Display” (p.80)
w
Choose a file by pressing the FWD ( )
or REV ( ) button on the remote
control unit.
Note • The remote control unit buttons are
operated in the same way as the
buttons on the camera.
R E L E ASE
ERASE F WD PROGR AM
E V
MULTI
RE V
ENTER
Setting Exposure Compensation
● Starting setting
Press the EV (+/–) button on the remote control unit.
● Setting the exposure compensation level
Set the exposure compensation level using the FWD (
) or REV ( )
button and press the ENTER button on the remote control unit. And then
press the RELEASE button to take a picture.
● Canceling the setting
Set the exposure compensation level to ±0.0.
Shooting in Manual Focus Mode
● Entering the mode
Press the ERASE button on the remote control unit.
● Focusing
Focus on the subject using the FWD (
) or REV ( ) button. Press the
RELEASE button to take a picture.
● Canceling the mode setting
Press the ERASE button again.