Ricoh RDC-5000 - Manual (Page 35)

33
Getting Started
1
• Insert the SmartMedia memory card in the correct direction. Do not insert it at
an angle.
• The camera will not turn on when the card door is open.
■ Removing Card
q
Check that the camera is turned off, and
then open the card door.
“Turning on the Camera” (p.41)
w
Press the button and pull the
SmartMedia memory card straight out of
the slot.
Pressing the button will cause the SmartMedia
memory card to pop out a little. Then, pull it
straight out of position.
e
Close the card door.
Important
Note • Never remove the SmartMedia memory card while data is being recorded
or erased. The data stored on the card could be lost or damaged.
• When the SmartMedia memory card has been removed, place it in the
antistatic case supplied or other protective cover.
Formatting a SmartMedia Memory Card
Before using a new SmartMedia memory card or a SmartMedia memory card that has
been used on another device (such as a PC), you need to format (initialize) it with the
camera.
Important
Note • Formatting will erase all the files recorded on the SmartMedia memory
card (including protected files).
• Do not format SmartMedia memory cards on a PC.
• The SmartMedia formatted by the other device may not be used.
Note
See