Ricoh RDC-5000 - Manual (Page 43)

41
Basic Shooting
2
Turning on the Camera
Slide the power switch to turn the camera on and slide the switch again to turn it off.
q
Slide the center button of power switch
to on.
w
Set the mode dial to [ ].
The camera will turn on and the monitor cover
will open.
The LCD panel or the LCD monitor will display
recording information.
● LCD Monitor Display
Press the DISPLAY button to switch displays
appearing on the LCD monitor. If the LCD monitor
is not used, press the DISPLAY button to save the
batteries. Press the DISPLAY button again to
enable the LCD monitor.
You may set the camera to come up with the LCD
monitor disabled when it is powered on. See
“Changing the LCD Setting” (p.110).
Note
• Slide the power switch again and the power will turn off, with the lens
barrier and monitor cover closed. In a play or erase mode, the lens
barrier won’t open or close when you turn on the power switch.
Tips
Auto Power-Off
The camera will turn off automatically (auto power-off) to conserve the
battery if it is left idle (no buttons, switches or other controls operated) for
more than 5 minutes. To resume use, turn the power on again.
You can disable the auto power-off mode.
See “Auto Power Off Setting” (p.103).
The auto power-off mode does not function when the camera is
powered by an AC adapter.