Ricoh RDC-5000 - Manual (Page 99)

97
Playback/Erasing
4
Erase Selected Files (Images)
Erases multiple selected image files.
Important
Note
• Files, once erased, cannot be restored. Before erasing files, check that
you are sure you want to erase them.
q
Set the mode dial to [ ] and press the
CARD/IN button to select a source file to
be erased.
An erase menu is displayed.
w
Press the or button to select
[ERASE SELECTED IMAGES] and press
the ENTER button.
The erase selected images menu is displayed.
Note
• To cancel the operation, set the mode
dial to another mode.
e
Press the or button to select an
image file to erase and press the ENTER
button.
The image file having the image number
reversed is designated by the (
) mark. To
select more files, repeat step
e
as many times
as needed.
Note
• To cancel copying a file bearing the
mark, press the ENTER key again.
r
Press the shutter release button.
The image files thus selected are erased.
The erase menu is displayed again after erasing
the selected files. Then, turn the mode dial to
select another mode.
Note
• Files may take time to erase, depending on the type of the SmartMedia
memory card mounted and the file type.
• Protected files cannot be erased. Unprotect them before erasing them.
See “Protecting a File” (p.87).
E R A S E S E L E C T E D I M A G E S
S T A R T : R E L E A S E
C A N C E L : M E N U S E L . : E N T E R
M E N U [ E R A S E ]
E R A S E S I N G L E I M A G E
E R A S E A L L I M A G E S
E R A S E S E L E C T E D I M A G E S
S E L . : E N T E R