Ricoh RDC-5000 - Manual (Page 116)

114
Erasing
You can use the remote control unit to erase a recorded file at a time.
Important
Note
• Remember that files cannot be restored once they are erased. Before
starting to erase files, make sure that you want to erase them.
q
Set the camera’s mode dial to [ ]. And
press the CARD/IN button to select a
source file to erase.
w
The erase menu will open. Use the FWD
(
) or REV ( ) button to select an
erase mode.
Select [ERASE SINGLE IMAGE] from the erase
menu to erase selected images one at a time.
Magnifying an Image (Zoom Playback)
● Entering the mode
Press the PROGRAM button on the remote control unit.
● Moving the playback position
Press the FWD (
) or REV ( ) button.
● Canceling the mode setting
Press the ENTER button to return to the normal playback display.
Displaying Multiple Images (Multi Image Playback)
● Entering the mode
Press the MULTI button on the remote control unit.
● Moving the selected file
Press the FWD (
) or REV ( ) button.
● Canceling the mode setting
Press the ENTER button and the selected file will appear on the normal
playback display screen.
RELEASE
ERASE FWD PROGRAM
EV
MULTI
REV
ENTER