Ricoh RDC-5000 - Manual (Page 48)

46
■ Zooming Out (Wide Angle Setting)
q
Press the ( ) button.
The subject will become smaller (wide) and the
zoom indication bar will appear on the LCD
monitor. Press the
button to adjust the
subject size to your liking.
■ Digital Zoom Function
If you keep the ( ) button for at least 2
seconds when the lens is set at the maximum
telephoto position, the digital zoom function is
triggered to add an enhanced telephotographic
effect to your shot.
Before using the digital zoom function, make
sure that the LCD monitor is On. When the LCD
monitor is off, press the DISPLAY button.
When shooting, a frame appears on the LCD
monitor as shown on the right, delineating the
scope of the digital zoom. At playback, the shot
will be played back in the same way as a normal
shot.
To disable the digital zoom function, press the
( ) button.
Note When the digital zoom function is enabled, shots taken will be recorded in
640
×
480 pixel format.
Keep the button
pressed for 2 seconds
or more
1800x1200 N 1800x1200 N
1 2