Basic shooting, Operation flow – Ricoh RDC-5000 User Manual
Page 42
40
Basic Shooting
This section explains the general flow of shooting operation, and provides basic
shooting instructions.
Operation Flow
To record an image, follow the steps below:
Slide the power switch to turn the camera on and set the mode dial to
[
] (p.41).
Select the internal memory (
) or SmartMedia (
). (p.42)
Choose from six picture modes (
,
,
,
,
,
and
) (p.43).
Choose from three recording modes (
and
) (p.44).
Use the
or
button to select the size of the subject (p.45)
Check the position of the subject on the viewfinder or on the LCD
monitor (p.47).
Press the shutter release button (p.48).
Turn on the Camera
Select a PIC (Image quality) Mode
Shoot
Set the Size of the Subject
Check the position of the subject
Select a Recording Mode
Select IN/CARD (Internal memory/SmartMedia memory card) Memory