Onkyo CR-N1 - Manual (Page 13)

13
Controls & connectors
A CD compartment [35]
CDs are loaded here.
B USB indicator [53, 56]
This indicator lights up when the CR-N1
is successfully recognized by the PC or
Mac connected to the USB port.
C ACOUSTIC PRESENCE indicator [34]
This indicator lights up when the Acous-
tic Presence function is set to either
A. PR 1 or A. PR 2.
D ENERGY SAVE indicator [30]
This indicator lights up when the Energy
Save function is on.
E STANDBY/ON button [30]
This button is used to turn on the CR-N1
and select Standby mode.
F SOURCE DIRECT indicator [51]
This indicator lights up when the CD,
LINE, USB, FM, and AM sources are
selected directly (i.e., when the USB Mix
function is off).
G USB MIX ON indicator [51]
This indicator lights up when the USB
Mix function is on.
H USB MIX button [51]
This button is used to turn on and off the
USB Mix function.
I USB MIX LEVEL control [51]
This control is used to balance the level
of the USB signal and the selected source
signal when using the USB Mix function.
J ENERGY SAVE button [30]
This button is used to turn on and off the
Energy Save function.
K MEMORY button [39, 42–45]
This button is used with CD Memory
Playback and when presetting radio sta-
tions.
L FM MODE button [45]
This button is used to set the FM mode to
either Auto or Mono.
M Next/Preview/Tuning button
[36–39, 41, 43–45]
When playing CDs, this button is used to
select the next track, subsequent tracks,
or to preview. It’s also used for tuning
the radio.
N DISPLAY button [40, 44–46]
When playing CDs, this button is used to
display the remaining track, disc, and
program times. It’s also used when nam-
ing radio presets.
O Previous/Review/Tuning button
[36–39, 41, 43–45]
When playing CDs, this button is used to
select the beginning of the current track,
previous tracks, or to review. It’s also
used for tuning the radio.
P OPEN/CLOSE button [35]
This button is used to open and close the
disc compartment.
Q PLAY/PAUSE button [35, 36]
This button is used to start and pause CD
playback.
R STOP button [36]
This button is used to stop CD playback.
S Remote control sensor [8]
This sensor receives command signals
from the remote controller.
T Display [14]
The display shows function settings and
other information. The current time is
displayed when the CR-N1 is in Standby
mode.
U VOLUME UP button [33]
This button is used to increase the vol-
ume.
V VOLUME DOWN button [33]
This button is used to decrease the vol-
ume.
W ACOUSTIC PRESENCE button [34]
This button is used to turn on and off the
Acoustic Presence function.
X INPUT selector button [33]
This button is used to select the CD, LINE,
USB, FM, and AM input sources.