Onkyo CR-N1 - Manual (Page 48)

48
Using the timer (remote controller only)
5 If you selected the FM or AM source, use
the SETTING ( / ) buttons to select a
preset station.
6
Press the STANDBY/ON button to enter
Standby mode.
At the specified ON time, the CR-N1 will
automatically turn on and play the speci-
fied source. Make sure that the volume is
set at an appropriate level, and if you’ve
programmed the timer for CD playback,
don’t forget to load a disc. At the speci-
fied OFF time, the CR-N1 will automati-
cally turn itself off.
If you configure a day as both a weekday
and a weekend day, for example, to turn
the CR-N1 on and off twice on that day,
leave at least one minute between the
first timer’s OFF setting and the second
timer’s ON setting. If the second timer’s
ON setting occurs before the first timer’s
OFF setting, the second timer’s settings
will be ignored.
If the sleep timer function is turned on
during a timer’s ON–OFF period, the
CR-N1 will automatically enter Standby
mode after the specified sleep time has
elapsed, ignoring the timer’s OFF setting.
The timer still works when the Energy
Save function is on.
The timers can be turned on and off inde-
pendently as follows.
Note that a timer cannot be turned on unless
it has been programmed.
1
Press the TIMER button repeatedly to
select the WEEKDAY or WEEKEND timer.
2 Use the SETTING ( / ) buttons to turn
the timer on or off, and then press the
ENTER button.
When the Weekday timer is on, “W.DAY”
is displayed, and when the Weekend
timer is on, “W.END” is displayed.
TIMER
STANDBY/ON
ENTER
SETTING ( / )
MHz
TIMER
W.DAY
Turning the timers on & off
or
TIMER
W.DAY