Onkyo CR-N1 - Manual (Page 44)

44
Listening to the radio
Presets can be named using up to eight char-
acters as follows.
1
Select the preset that you want to name.
See “Selecting preset stations” on
page 43 for more information.
2
Press and hold the DISPLAY button until
the flashing cursor appears “–”.
3 Use the Tuning ( / ) but-
tons to select characters.
The following 54 characters are available:
4 Press the MEMORY button to set the
character and move the cursor to the
next position.
You can enter spaces by pressing the
MEMORY button.
5
When you’ve finished, press and hold
down the DISPLAY button for two sec-
onds, or select the rightmost character
and then press the MEMORY button.
If you don’t press any buttons for 16 sec-
onds during this procedure, the function
completes automatically.
FM stations that support RDS Program
Service Names (PS) cannot be named.
Naming presets
MEMORY
DISPLAY
STEREO AUTO
STEREO AUTO
A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z " & ' ( )
* + , – / = ? [ \ ] I
0 1 2 3 4 5 6 7 8 9 Space
`
STEREO AUTO
STEREO AUTO